ROX 1 1/4" Block Riser for 7/8" Bars
RO02-1-2010
- Free Shipping USA
- Low stock - 1 item left
- Backordered
• Bar Height: Raises 7/8-inch handlebars by 1-1/4 inches, giving a more upright and comfortable riding position.
• Simple Fit: Sits on your existing handlebar clamps and reuses your original top cap — longer bolts are included so no other parts are needed.
• Bar Diameter: 7/8 in
• Rise Height: 1-1/4 in (center to center)
• Type: Non-pivoting riser
• Hardware: Longer replacement bolts included
• Weight: 0.75 lbs
• Dimensions: 7.5 × 5 × 1 in
A simple, non-pivoting riser for riders who need more height from their 7/8-inch bars without changing their existing clamp setup. It sits on top of your original handlebar clamps and reuses your stock top cap. Longer bolts are included.
One thing worth knowing before you install: because this is a non-pivoting riser, your bars will move back toward you at roughly the same angle as your fork tubes as they rise. If you want your bars to go straight up without coming back, look at the Pro-Offset or Pivoting Riser options instead.
Designed to work with bikes using OEM hex head 8mm bolts, including the XR650, XRL650, DR-Z400, DR650, and others. Always confirm you have enough cable and brake line length before fitting any handlebar riser.
• Bar Height: Raises 7/8-inch handlebars by 1-1/4 inches, giving a more upright and comfortable riding position.
• Simple Fit: Sits on your existing handlebar clamps and reuses your original top cap — longer bolts are included so no other parts are needed.
A simple, non-pivoting riser for riders who need more height from their 7/8-inch bars without changing their existing clamp setup. It sits on top of your original handlebar clamps and reuses your stock top cap. Longer bolts are included.
One thing worth knowing before you install: because this is a non-pivoting riser, your bars will move back toward you at roughly the same angle as your fork tubes as they rise. If you want your bars to go straight up without coming back, look at the Pro-Offset or Pivoting Riser options instead.
Designed to work with bikes using OEM hex head 8mm bolts, including the XR650, XRL650, DR-Z400, DR650, and others. Always confirm you have enough cable and brake line length before fitting any handlebar riser.
• Bar Diameter: 7/8 in
• Rise Height: 1-1/4 in (center to center)
• Type: Non-pivoting riser
• Hardware: Longer replacement bolts included
• Weight: 0.75 lbs
• Dimensions: 7.5 × 5 × 1 in
