AltRider Tail Tidy Fender Eliminator with LED Light Kit for the Yamaha Tenere 700

The OEM Yamaha Tenere 700 tail fender is heavy, bulky, and built more for compliance than real off-road performance. This tail tidy replaces the stock setup with a cleaner, lighter, and significantly stronger system designed to handle aggressive riding without flexing, cracking, or failing over time.

What sets this design apart is the reinforced 2-part construction. Instead of relying on surface-mounted attachment points like most tail tidies, the load is distributed deep into the sub-frame through a stainless steel internal support and formed gussets. The result is a rigid, durable setup that holds up on rough trails, rocky descents, and long-distance adventure riding.

The license plate mounts close to the bike at an optimized angle that keeps it safely clear of aggressive knobby tires, even under full suspension compression. Four pre-drilled mounting points help spread stress across the plate and reduce the risk of cracks commonly seen with standard 2-hole designs. Integrated cable routing slots keep all wiring neatly tucked away inside the tail plastics for a clean factory-style finish.

The system is compatible with OEM incandescent blinkers (2019–2023), OEM LED blinkers (2024–current), and aftermarket blinkers using a standard 10mm mount. It also works perfectly with the Cyclops Tuff Light Full Flex LED blinkers. Their flexible spring-loaded design helps prevent damage during impacts or tip-overs. Running light and brake light functions can also be disabled if preferred.

Designed to pair seamlessly with the AltRider luggage rack, this tail tidy gives the Tenere 700 a clean, fully integrated rear-end appearance while maintaining the durability needed for serious adventure riding. Compatible with Tenere 700, World Raid, and Rally models.

Note: License plate mounting screws are not included.

The OEM Yamaha Tenere 700 tail fender is heavy, bulky, and built more for compliance than real off-road performance. This tail tidy replaces the stock setup with a cleaner, lighter, and significantly stronger system designed to handle aggressive riding without flexing, cracking, or failing over time.

What sets this design apart is the reinforced 2-part construction. Instead of relying on surface-mounted attachment points like most tail tidies, the load is distributed deep into the sub-frame through a stainless steel internal support and formed gussets. The result is a rigid, durable setup that holds up on rough trails, rocky descents, and long-distance adventure riding.

The license plate mounts close to the bike at an optimized angle that keeps it safely clear of aggressive knobby tires, even under full suspension compression. Four pre-drilled mounting points help spread stress across the plate and reduce the risk of cracks commonly seen with standard 2-hole designs. Integrated cable routing slots keep all wiring neatly tucked away inside the tail plastics for a clean factory-style finish.

The system is compatible with OEM incandescent blinkers (2019–2023), OEM LED blinkers (2024–current), and aftermarket blinkers using a standard 10mm mount. It also works perfectly with the Cyclops Tuff Light Full Flex LED blinkers. Their flexible spring-loaded design helps prevent damage during impacts or tip-overs. Running light and brake light functions can also be disabled if preferred.

Designed to pair seamlessly with the AltRider luggage rack, this tail tidy gives the Tenere 700 a clean, fully integrated rear-end appearance while maintaining the durability needed for serious adventure riding. Compatible with Tenere 700, World Raid, and Rally models.

Note: License plate mounting screws are not included.

The OEM Yamaha Tenere 700 tail fender is heavy, bulky, and built more for compliance than real off-road performance. This tail tidy replaces the stock setup with a cleaner, lighter, and significantly stronger system designed to handle aggressive riding without flexing, cracking, or failing over time.

What sets this design apart is the reinforced 2-part construction. Instead of relying on surface-mounted attachment points like most tail tidies, the load is distributed deep into the sub-frame through a stainless steel internal support and formed gussets. The result is a rigid, durable setup that holds up on rough trails, rocky descents, and long-distance adventure riding.

The license plate mounts close to the bike at an optimized angle that keeps it safely clear of aggressive knobby tires, even under full suspension compression. Four pre-drilled mounting points help spread stress across the plate and reduce the risk of cracks commonly seen with standard 2-hole designs. Integrated cable routing slots keep all wiring neatly tucked away inside the tail plastics for a clean factory-style finish.

The system is compatible with OEM incandescent blinkers (2019–2023), OEM LED blinkers (2024–current), and aftermarket blinkers using a standard 10mm mount. It also works perfectly with the Cyclops Tuff Light Full Flex LED blinkers. Their flexible spring-loaded design helps prevent damage during impacts or tip-overs. Running light and brake light functions can also be disabled if preferred.

Designed to pair seamlessly with the AltRider luggage rack, this tail tidy gives the Tenere 700 a clean, fully integrated rear-end appearance while maintaining the durability needed for serious adventure riding. Compatible with Tenere 700, World Raid, and Rally models.

Note: License plate mounting screws are not included.

This all-inclusive kit upgrades the blinkers on your Yamaha Tenere 700 (2024–current) and adds running and brake light functions front and rear. The 2024 kit includes block-off plates and model-specific plugs, so everything fits cleanly without modification.
Visibility upgrades come built in. White running lights up front, red running and brake lights in the rear. If you prefer to run blinkers only, the running and brake light functions can be switched off. The amber blinker output remains.

The spring-loaded stems are the core of this design. They flex in any direction on impact — a tip-over, a tree branch, a crash — and return to position. You will not be stopping to pick up broken blinker stems on the trail.
These blinkers are built for riders who spend time off-road and on rough roads where tip-overs and brush contact are real possibilities. The spring-loaded stems absorb impact and return to position — no broken signals after a fall or trail contact.

The kit includes a flasher and block-off plates so installation is complete out of the box. Front and rear running lights and rear brake lights are included for better visibility in traffic, but these functions can be switched off if you prefer blinker-only operation.

This is a complete replacement signal solution, not a patch on your stock setup.

These blinkers are built for riders who spend time off-road and on rough roads where tip-overs and brush contact are real possibilities. The spring-loaded stems absorb impact and return to position — no broken signals after a fall or trail contact.

The spring-loaded stems are the core of this design. They flex in any direction on impact — a tip-over, a tree branch, a crash — and return to position. You will not be stopping to pick up broken blinker stems on the trail.

The kit includes a flasher and block-off plates so installation is complete out of the box. Front and rear running lights and rear brake lights are included for better visibility in traffic, but these functions can be switched off if you prefer blinker-only operation.

This is a complete replacement signal solution, not a patch on your stock setup.