AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)
AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)

AltRider Water Pump Guard for the Yamaha Tenere 700 (2019-Curent)

T719-2-1103

$128.36
/
Shipping calculated at checkout.
  • Free Shipping USA
  • In stock, ready to ship
  • Backordered

• Stranded-Proof Protection: The Tenere 700's water pump is exposed and vulnerable — a single hard hit can leave you stranded far from help and facing a costly engine repair bill.
• One-Piece Strength: Machined from a single block of billet aluminum, the guard has no long bolts or spacers that could act as leverage points and fail under a hard impact.
• Full Coverage: Covers both the water pump housing and the coolant pipe junction, the two points most at risk from rocks and debris.
• Close Fit, No Contact: The guard stands off from the housing by only a few millimeters — tight enough to look clean, but with enough gap to prevent the guard from pressing into the pump on impact.
• Hard-Anodized Finish: The hard anodized black surface resists scratching and blends with the motor so the guard looks like it belongs on the bike.
• Quick Install: Designed to go on easily with included Loctite and first class manual

yTjaOfrsowE

• Material: Solid billet aluminum
• Finish: Hard anodized black
• Mounting Points: 3
• Weight: 0.75 lbs
• Dimensions: 5.875 × 4.625 × 1.375 in

The Tenere 700's water pump sits exposed. One hard hit from a rock or debris can crack the housing, damage the coolant pipe junction, and leave you stranded with a repair bill that hurts. The AltRider Water Pump Guard is designed to prevent that.

It mounts to three solid points and covers both the water pump housing and the coolant pipe junction — the two areas most at risk. The guard stands off from the housing by a few millimeters, keeping a close fit without pressing into the pump on impact.

The one-piece billet aluminum construction is the key design decision. Other guards use long bolts and spacers that create leverage points — places where force concentrates and parts fail. This guard eliminates those points entirely. It is also compatible with the Tenere 700 World Raid model.

Install Instructions for T7 Water Pump Guard: ▶

Install Instructions for T7 Water Pump Guard:

• Stranded-Proof Protection: The Tenere 700's water pump is exposed and vulnerable — a single hard hit can leave you stranded far from help and facing a costly engine repair bill.
• One-Piece Strength: Machined from a single block of billet aluminum, the guard has no long bolts or spacers that could act as leverage points and fail under a hard impact.
• Full Coverage: Covers both the water pump housing and the coolant pipe junction, the two points most at risk from rocks and debris.
• Close Fit, No Contact: The guard stands off from the housing by only a few millimeters — tight enough to look clean, but with enough gap to prevent the guard from pressing into the pump on impact.
• Hard-Anodized Finish: The hard anodized black surface resists scratching and blends with the motor so the guard looks like it belongs on the bike.
• Quick Install: Designed to go on easily with included Loctite and first class manual

The Tenere 700's water pump sits exposed. One hard hit from a rock or debris can crack the housing, damage the coolant pipe junction, and leave you stranded with a repair bill that hurts. The AltRider Water Pump Guard is designed to prevent that.

It mounts to three solid points and covers both the water pump housing and the coolant pipe junction — the two areas most at risk. The guard stands off from the housing by a few millimeters, keeping a close fit without pressing into the pump on impact.

The one-piece billet aluminum construction is the key design decision. Other guards use long bolts and spacers that create leverage points — places where force concentrates and parts fail. This guard eliminates those points entirely. It is also compatible with the Tenere 700 World Raid model.

• Material: Solid billet aluminum
• Finish: Hard anodized black
• Mounting Points: 3
• Weight: 0.75 lbs
• Dimensions: 5.875 × 4.625 × 1.375 in

Install Instructions for T7 Water Pump Guard: ▶

Install Instructions for T7 Water Pump Guard:

×