AltRider High Fender Kit with Speed Bleeder for the Yamaha Tenere 700

• Mud Prevention: Raises the fender away from the wheel so mud and debris cannot jam the front end during serious off-road riding.
• Strong Mounting: Steel bracket mounts to the triple tree at four points, built to handle the forces of highway speeds and rough terrain.
• Legal Brake Lines: Replaces the stock brake lines with DOT-approved braided stainless steel hoses that are street legal and built for long-term durability.
• Clean Finish: 3D printed ABS blanking plates cover the original fender mounting points on the fork guards so the conversion looks factory.

• Mud Prevention: Moves the fender up and away from the wheel so mud and debris cannot jam the front end during serious off-road riding.
• Stronger Mount: The steel bracket is laser cut, formed, and powder-coated, then bolted to the triple tree at four points to handle forces at highway speeds.
• Street-Legal Brake Lines: Replacing the stock lines is required with a high fender — this kit includes DOT-approved, braided stainless steel brake hoses with UV-resistant PVC coating and built-in strain reliefs.
• Clean Finish: 3D-printed ABS blanking plates cover the original fender mounting holes on the fork leg guards, so the conversion looks intentional and complete.

• Mud Protection: Raises the front fender to prevent mud and debris from jamming during serious off-road riding — keeping you moving when trails get messy.
• Maximum Strength: The steel bracket mounts to the triple tree at four points, giving it enough strength to hold firm at highway speeds and over rough terrain.
• Street-Legal Brakes: Replaces the stock brake lines with DOT-approved braided stainless steel hoses — required when moving to a high fender and built for long-term durability.
• Brake Line Durability: The braided stainless lines are wrapped in UV-resistant black PVC with built-in strain reliefs, protecting them from abrasion and sun damage over time.
• Clean Finish: 3D-printed ABS blanking plates cover the original fender mounting points on the fork leg guards, giving the front end a clean, purposeful look.

• Mud Clearance: Moves the front fender high and away from the wheel, preventing mud and debris from jamming against the stock fender during serious off-road riding.
• Strong Mounting: Steel bracket mounts to the triple tree at four points for maximum strength that holds securely at highway speeds.
• Street-Legal Brake Lines: Custom dual-sided brake hose kit replaces the stock lines to route correctly with the high fender — DOT-approved for road use.
• Durable Brake Lines: Braided stainless steel lines with UV-resistant black PVC coating and built-in strain reliefs for long-lasting performance.
• Clean Finish: 3D-printed ABS blanking plates cover the original fender mounting points on the fork leg guards for a tidy, finished look.

• Mud Prevention: Raises the fender away from the wheel so mud and debris cannot jam the front end during serious off-road riding.
• Strong Mounting: Steel bracket mounts to the triple tree at four points, built to handle the forces of highway speeds and rough terrain.
• Legal Brake Lines: Replaces the stock brake lines with DOT-approved braided stainless steel hoses that are street legal and built for long-term durability.
• Clean Finish: 3D printed ABS blanking plates cover the original fender mounting points on the fork guards so the conversion looks factory.
• Easy Bleeding: The included Speed Bleeder replaces the standard bleed nipple with a one-way valve — open a quarter turn, pump the lever, done. No assistant needed.

• Mud Prevention: The high fender position eliminates the stock fender's tendency to pack with mud and debris during serious off-road riding, so the wheel keeps spinning freely.
• Strong Mount: The laser-cut steel bracket attaches to the triple tree at four points, giving it the rigidity needed to handle forces at highway speeds without flex or failure.
• Street-Legal Brake Lines: Custom dual-sided braided stainless steel brake lines replace the stock lines required by the fender relocation and are DOT-approved for road use.
• Durable Hose Build: Brake lines are wrapped in UV-resistant black PVC with built-in strain reliefs to resist cracking and wear over time.
• Clean Finish: 3D-printed ABS blanking plates cover the original fender mounting points on the fork guards, so the conversion looks factory rather than patched.
• Easier Brake Bleeding: The included Speed Bleeder replaces the standard bleed nipple with a one-way valve design — open a quarter turn, pump the lever, and the job is done without an assistant.

• Mud Prevention: Moves the fender high and away from the wheel so mud and debris cannot jam the front end during serious off-road riding.
• Strong Mount: Laser-cut, powder-coated steel bracket bolts to the triple tree at four points to handle the forces of highway speeds and rough terrain.
• DOT-Approved Brake Lines: Custom dual-sided braided stainless steel brake hose kit is street legal and required when moving to a high fender mount — all fittings and grommets included.
• Durable Hose Coating: Brake lines are wrapped in UV-resistant black PVC with built-in strain reliefs so they hold up to heat, sunlight, and trail abuse.
• Clean Finish: 3D-printed ABS blanking plates cover the original fender mounting points on the fork leg guards so nothing looks unfinished.
• Faster Brake Bleeding: The included Speed Bleeder replaces the stock bleed nipple with a one-way valve — loosen a quarter turn, pump the lever, tighten. No second person needed.

• Mud Clearance: Moves the front fender high and away from the wheel, preventing mud and debris from jamming against the stock fender during serious off-road riding.
• Strong Mounting: Steel bracket mounts to the triple tree at four points for maximum strength that holds securely at highway speeds.
• Street-Legal Brake Lines: Custom dual-sided brake hose kit replaces the stock lines to route correctly with the high fender — DOT-approved for road use.
• Durable Brake Lines: Braided stainless steel lines with UV-resistant black PVC coating and built-in strain reliefs for long-lasting performance.
• Clean Finish: 3D-printed ABS blanking plates cover the original fender mounting points on the fork leg guards for a tidy, finished look.
• Easier Brake Bleeding: Included Speed Bleeder replaces the stock bleed nipple with a one-way valve so you can bleed the brakes with one person in minutes — no repeated tightening and loosening required.