AltRider Skid Plate for the Honda CRF1000L Africa Twin/ ADV Sports - Silver
AT16-1-1200
- Free Shipping USA
- Low stock - 1 item left
- Backordered
• Full Engine Coverage: Protects the entire underside of the liquid-cooled motor including the headers — the areas most exposed to rock strikes.
• Maximum Ground Clearance: Smooth flat bottom lets the plate slide over rocks and obstacles without catching, and retains as much factory clearance as possible.
• Quality Hardware: Stainless steel fasteners resist corrosion for long-term durability in wet and muddy conditions.
• No Weak Points: TIG-welded seams on every joint give the plate the strength other designs skip.
• Stays Cool: Cutouts in the plate allow airflow and heat to escape so the engine does not overheat behind the guard.
• Better Cornering Clearance: Large 2-inch formed bends at the edges give extra clearance when leaning through turns on uneven ground.
• Oil Change Friendly: The mounting bracket stays on the bike during an oil change, saving time on the trail or at camp.
• Material: Aluminum
• Thickness: 0.16 in (4.1 mm)
• Construction: Single piece, laser cut, grain finished, formed and TIG welded
• Formed Bend Diameter: 2 in (50.8 mm)
• Mounting Points: 4-point, factory hard points
• Mounting Hardware: Captured threaded fasteners on bracket
• Weight: 8.25 lbs
• Dimensions: 6 × 14 × 16 in
• Full Engine Coverage: Protects the entire underside of the liquid-cooled motor including the headers — the areas most exposed to rock strikes.
• Maximum Ground Clearance: Smooth flat bottom lets the plate slide over rocks and obstacles without catching, and retains as much factory clearance as possible.
• Quality Hardware: Stainless steel fasteners resist corrosion for long-term durability in wet and muddy conditions.
• No Weak Points: TIG-welded seams on every joint give the plate the strength other designs skip.
• Stays Cool: Cutouts in the plate allow airflow and heat to escape so the engine does not overheat behind the guard.
• Better Cornering Clearance: Large 2-inch formed bends at the edges give extra clearance when leaning through turns on uneven ground.
• Oil Change Friendly: The mounting bracket stays on the bike during an oil change, saving time on the trail or at camp.
• Material: Aluminum
• Thickness: 0.16 in (4.1 mm)
• Construction: Single piece, laser cut, grain finished, formed and TIG welded
• Formed Bend Diameter: 2 in (50.8 mm)
• Mounting Points: 4-point, factory hard points
• Mounting Hardware: Captured threaded fasteners on bracket
• Weight: 8.25 lbs
• Dimensions: 6 × 14 × 16 in
